Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch: The Best Software for Preserving and Enhancing Your Old Videos
Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch: How to Convert Your Old Videos to Digital or DVD
Do you have a collection of old VHS tapes or camcorder recordings that you want to preserve and enjoy on your modern devices? If so, you might be interested in Roxio Easy VHS to DVD 3 Plus, a software that allows you to easily convert your analog videos to digital or DVD formats.
Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch
In this article, we will show you how to use Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch, a software update that improves the performance and compatibility of the original software. We will also explain why you need to convert your old videos, what are the benefits of using this software, and how to install, connect, capture, edit, export, and share your videos with Roxio Easy VHS to DVD 3 Plus.
By the end of this article, you will be able to give your old videos new life and bring back your best memories with Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch.
Introduction
What is Roxio Easy VHS to DVD 3 Plus and what does it do?
Roxio Easy VHS to DVD 3 Plus is a software that helps you convert your old VHS tapes or camcorder recordings to digital or DVD formats. It comes with a capture device that connects your VHS player or camcorder to your PC via an RCA cable (not included). It also provides you with tools to edit and enhance your videos before you export them or burn them to disc.
Roxio Easy VHS to DVD 3 Plus can handle various types of analog video sources, such as VCRs, camcorders, Hi8, Video8, Digital8, Betamax, DV, DVCAM, DVCPro, DVCPro50, DVCProHD tapes, etc. It can also convert your analog audio sources, such as LPs and cassettes, to CDs or MP3s.
Why do you need to convert your old videos to digital or DVD?
There are several reasons why you might want to convert your old videos to digital or DVD formats. Here are some of them:
Preserve your videos from deterioration and damage. VHS tapes and camcorder recordings are not meant to last forever. They can degrade over time due to factors such as heat, humidity, dust, mold, and magnetic interference. They can also get damaged by physical wear and tear, such as scratches, breaks, or jams. By converting your videos to digital or DVD formats, you can protect them from these risks and ensure that they will not be lost or corrupted.
Enjoy your videos on modern devices and platforms. VHS tapes and camcorder recordings are not compatible with most of the devices and platforms that we use today, such as smartphones, tablets, laptops, smart TVs, streaming services, etc. By converting your videos to digital or DVD formats, you can make them accessible and playable on any device or platform that you prefer. You can also share them with your friends and family online or on social media.
Improve the quality and appearance of your videos. VHS tapes and camcorder recordings often have poor quality and appearance compared to the standards of today. They can have issues such as low resolution, blurry images, faded colors, distorted sound, etc. By converting your videos to digital or DVD formats, you can improve their quality and appearance by using the editing and enhancing tools that Roxio Easy VHS to DVD 3 Plus provides. You can also customize your videos by adding titles, transitions, effects, etc.
What are the benefits of using Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch?
Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch is a software update that improves the performance and compatibility of the original software. It fixes some bugs and errors that users have reported, such as:
The software crashing or freezing during the installation or operation
The software not recognizing the capture device or the video source
The software not capturing or exporting the video properly
The software not burning the DVD correctly or completely
The software not working with Windows 10 or other operating systems
By installing Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch, you can enjoy a smoother and more reliable experience with the software. You can also benefit from the following features that the patch adds or enhances:
The ability to capture video in HD (720p) resolution
The ability to export video in MP4 format for easy playback on mobile devices
The ability to upload video directly to YouTube or Facebook from the software
The ability to split home movies into separate files automatically based on content
The ability to stabilize shaky video footage with image correction tools
To download Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch, you can visit this link: https://www.roxio.com/en/support/software-updates/easy-vhs-to-dvd/
How to Install Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch
Where to download the patch and how to install it
To install Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch, you need to have the original software already installed on your PC. If you don't have it yet, you can buy it from this link: https://www.roxio.com/en/products/easy-vhs-to-dvd/standard/
Once you have the original software installed, you can download the patch from this link: https://www.roxio.com/en/support/software-updates/easy-vhs-to-dvd/
After downloading the patch file, follow these steps to install it:
Close any open applications on your PC.
Double-click on the patch file (RoxioEasyVHStoDVDPlus_v3_0_1_28.exe) to run it.
Follow the instructions on the screen to complete the installation.
Restart your PC when prompted.
Launch Roxio Easy VHS to DVD 3 Plus from your desktop or start menu.
What are the system requirements and compatibility issues
To install and run Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch, you need to have a PC that meets the following system requirements:
Operating System
Windows 10, 8, 7
Processor
1.6 GHz or faster
Memory
2 GB RAM or more
Hard Disk Space
3 GB free space or more
Video Card
DirectX 9 compatible or higher
Sound Card
16-bit Windows compatible or higher
Optical Drive
DVD-ROM for installation, DVD writer for DVD burning
Internet Connection
Required for product registration, updates, and online sharing
Other Devices
VCR or camcorder with analog outputs, RCA cable (not included), USB 2.0 port for capture device (included)
Please note that Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch is not compatible with Mac OS or Linux systems. It is also not compatible with some video formats, such as Blu-ray, HDV, AVCHD, MPEG-4, and H.264.
How to troubleshoot common installation problems
If you encounter any problems during the installation of Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch, you can try the following solutions:
Make sure you have the latest version of the original software. You can check the version number of your software by clicking on Help > About in the main menu. If you have an older version, you can download the latest version from this link: https://www.roxio.com/en/support/software-updates/easy-vhs-to-dvd/
Make sure you have enough disk space and memory. You can check the disk space and memory of your PC by clicking on Start > Settings > System > Storage and Start > Settings > System > About respectively. If you have insufficient disk space or memory, you can free up some space by deleting unnecessary files or programs, or adding more storage or RAM to your PC.
Make sure you have a stable internet connection. You can check the speed and stability of your internet connection by visiting this link: https://www.speedtest.net/. If you have a slow or unstable internet connection, you can try to restart your router or modem, move closer to the router or modem, use a wired connection instead of wireless, or contact your internet service provider.
Make sure you have the right permissions and settings. You can check the permissions and settings of your PC by clicking on Start > Settings > Privacy and Start > Settings > Update & Security respectively. If you have the wrong permissions or settings, you can try to run the patch file as an administrator, disable your antivirus or firewall temporarily, or update your Windows system.
Contact Roxio customer support. If none of the above solutions work, you can contact Roxio customer support by visiting this link: https://www.roxio.com/en/support/. You can also browse their online knowledge base, forums, and tutorials for more information and guidance.
How to Connect Your VHS Player or Camcorder to Your PC
What are the hardware and software components you need
To connect your VHS player or camcorder to your PC, you need the following hardware and software components:
A VHS player or camcorder with analog outputs. This is the device that plays your old videos. It should have analog outputs such as composite (yellow) or S-video (black) for video, and RCA (red and white) for audio.
A Roxio capture device. This is the device that comes with Roxio Easy VHS to DVD 3 Plus software. It has a USB connector on one end and three RCA connectors on the other end (yellow for video, red and white for audio).
An RCA cable. This is the cable that connects your VHS player or camcorder to the Roxio capture device. It has three RCA connectors on both ends (yellow for video, red and white for audio). You can buy this cable from any electronics store or online retailer.
A PC with Roxio Easy VHS to DVD 3 Plus 3.0.1.28 Patch installed. This is the device that captures, edits, exports, and shares your videos. It should meet the system requirements and compatibility issues mentioned above.
How to use the Roxio capture device and the RCA cable
To use the Roxio capture device and the RCA cable, follow these steps:
Turn off your VHS player or camcorder and your PC.
Connect the RCA cable to the analog outputs of your VHS player or camcorder. Make sure to match the colors of the connectors (yellow for video, red and white for audio).
Connect the other end of the RCA cable to the Roxio capture device. Again, make sure to match the colors of the connectors.
Connect the USB connector of the Roxio capture device to a USB 2.0 port on your PC.
Turn on your VHS player or camcorder and your PC.
Launch Roxio Easy VHS to DVD 3 Plus from your desktop or start menu.
How to adjust the video and audio settings and preferences
To adjust the video and audio settings and preferences, follow these steps:
In Roxio Easy VHS to DVD 3 Plus, click on Options in the main menu.
In the Options window, click on Capture.
In the Capture tab, you can adjust the following settings and preferences:
Video Source: Select the type of video source you are using (composite or S-video).
Video Standard: Select the video standard that matches your region (NTSC or PAL).
Capture Resolution: Select the resolution that you want to capture your video in (480p or 720p).
Capture Quality: Select the quality that you want to capture your video in (Good, Better, or Best).
Capture Format: Select the format that you want to capture your video in (MPEG-2 or MP4).
Capture Folder: Select the folder where you want to save your captured video files.
In the Options window, click on Audio.
In the Audio tab, you can adjust the following settings and preferences:
Audio Source: Select the type of audio source you are using (Roxio Video Capture USB or other).
Audio Input: Select the input channel that matches your audio source (Line In or Microphone).
Mute Audio: Check this box if you want to mute the audio during capture.
Audio Level: Adjust the volume of the audio during capture.
In the Options window, click on OK to save your settings and preferences.
How to Capture and Edit Your Videos with Roxio Easy VHS to DVD 3 Plus
How to import and capture video from your device
To import and capture video from your device, follow these steps:
In Roxio Easy VHS to DVD 3 Plus, click on Video > Import Video in the main menu.
In the Import Video window, click on Start Capture.
On your VHS player or camcorder, press Play to start playing your video.
On your PC, you will see a preview of your video on the screen. You can also see the duration, size, and quality of your video file.
If you want to stop capturing your video, click on Stop Capture.
If you want to capture more videos, repeat steps 3 to 5.
When you are done capturing your videos, click on Finish.
Your captured video files will be saved in the folder that you selected in the Options window. You can also find them in the Media Manager window under Captured Videos.
How to organize, trim, and enhance your video clips
To organize, trim, and enhance your video clips, follow these steps:
In Roxio Easy VHS to DVD 3 Plus, click on Video > Edit Video - Advanced in the main menu.
In the Edit Video - Advanced window, you will see three tabs: Media Selector, Preview Window, and Storyboard.
In the Media Selector tab, you can browse and select your video clips from various sources, such as Captured Videos, My Videos, My Pictures, etc. You can also import video clips from other devices or folders by clicking on Add Media.
To add a video clip to your project, drag and drop it from the Media Selector tab to the Storyboard tab. You can also right-click on a video clip and select Add to Storyboard.
To rearrange the order of your video clips on the Storyboard tab, drag and drop them to the desired position. You can also right-click on a video clip and select Move Left or Move Right.
To trim a video clip on the Storyboard tab, double-click on it to open the Trim window. You can also right-click on a video clip and select Trim.
In the Trim window, you can use the sliders or the buttons to set the start and end points of your video clip. You can also use the playback controls to preview your video clip. Click on OK to save your changes.
To enhance a video clip on the Storyboard tab, double-click on it to open the Enhance window. You can also right-click on a video clip and select Enhance.
In the Enhance window, you can use various tools to improve the quality and appearance of your video clip. You can adjust the brightness, contrast, color, saturation, sharpness, etc. You can also apply filters such as noise reduction, deinterlacing, stabilization, etc. Click on OK to save your changes.
How to add titles, transitions, and effects to your videos
To add titles, transitions, and effects to your videos, follow these steps:
In Roxio Easy VHS to DVD 3 Plus, click on Video > Edit Video - Advanced in the main menu.
In the Edit Video - Advanced window, you will see four tabs: Media Selector, Preview Window, Storyboard, and Effects.
In the Effects tab, you can find various types of effects that you can add to your videos, such as titles, transitions, overlays, filters, etc.
To add a title to your video, click on the Titles category and select a title style that you like. You can also click on More Titles to download more title styles from the internet.
Drag and drop the title style to the Storyboard tab, either before or after a video clip. You can also right-click on the title style and select Add to Storyboard.
Double-click on the title style on the Storyboard tab to open the Title Editor window. You can also right-click on the title style and select Edit Title.
In the Title Editor window, you can customize your title by changing the text, font, size, color, alignment, etc. You can also add animations, shadows, outlines, etc. Click on OK to save your changes.
To add a transition to your video, click on the Transitions category and select a transition style that you like. You can also click on More Transitions to download more transition styles from the internet.
Drag and drop the transition style to the Storyboard tab, between two video clips. You can also right-click on the transition style and select Add to Storyboard.
Double-click on the transition style on the Storyboard tab to open the Transition Editor window. You can also right-click on the transition style and select Edit Transition.
In the Transition Editor window, you can customize your transition by changing the duration, direction, speed, etc. Click on OK to save your changes.
To add an overlay to your video, click on the Overlays category and select an overlay style that you like. You can also click on More Overlays to download more overlay styles from the internet.
Drag and drop the overlay style to the Storyboard tab, over a video clip. You can also right-click on the overlay style and select Add to Storyboard.
Double-click on the overlay style on the Storyboard tab to open the Overlay Editor window. You can also right-click on the overlay style and select Edit Overlay.
In the Overlay Editor window, you can customize your overlay by changing the position, size, opacity, etc. You can also add animations, masks, chroma keys, etc. Click on OK to save your changes.
To add a filter to your video, click on the Filters category and select a filter style that you like. You can also click on More Filters to download more filter styles from the internet.
Drag and drop the filter style to the Storyboard tab, over a video clip. You can also right-click on the filter style and select Add to Storyboard.
Double-click on the filter style on the Storyboard tab to open the Filter Editor window. You can also right-click on the filter style and select Edit Filter.
In the Filter Editor window, you can customize your filter by changing the intensity, hue, saturation, etc. You can also apply effects such as sepia, black and white, negative, etc. Click on OK to save your changes.
How to Export and Share Your Videos with Roxio Easy VHS to DVD 3 Plus
How to burn your videos to DVD with chapters and menus
To burn your videos to DVD with chapters and menus, follow these steps:
In Roxio Easy VHS to DVD 3 Plus, click on Video > Create DVDs in the main menu.
In the Create DVDs window, you will see three tabs: Media Selector, Preview Window, and Menu Styles.
In the Media Selector tab, you can browse and select your video clips from various sources, such as Captured Videos, My Videos, My Pictures, etc. You can also import video clips from other devices or folders by clicking on Add Media.
To add a video clip to your DVD project, drag and drop it from the Media Selector tab to the Preview Window. You can also right-click on a video clip and select Add to DVD.
To rearrange the order of yo